In order to prevent the deflection of the main shaft of the working machine and the occurrence of additional force on the bearing of the cycloidal pin wheel non-standard reducer, the distance between the cycloidal pin wheel non-standard reducer and the working machine should be as far as possible without affecting the normal operation. Small, its value is 5-10mm.

Cycloid pin wheel non-standard reducer equipment, cycloidal pin wheel non-standard reducer and working machine equipment to prevent deflection of the main shaft of the working machine and additional force on the cycloidal pin wheel non-standard reducer bearing, cycloid The distance between the needle wheel non-standard reducer and the working machine should be as small as possible without affecting the normal operation, and its value is 5-10mm.

The connection of the cycloidal pin wheel non-standard reducer and the working machine The cycloidal pin wheel non-standard reducer is directly set on the main shaft of the working machine. When the non-standard reducer is in operation, the reaction torque acting on the non-standard reducer case is also The counter-torque bracket of the equipment on the non-standard gear box body or other methods to balance. The machine is directly matched, and the other end is connected with the fixed bracket.

Anti-torque support equipment The anti-torque support equipment is on the side of the working machine facing the non-standard reducer to reduce the bending moment attached to the working machine shaft. The shaft sleeve at the connecting end of the counter-moment bracket and the fixed support uses rubber and other elastomers to prevent flexure and absorb the generated torque.

When disassembling the cycloidal needle wheel non-standard reducer, try to prevent hammering to prevent damage to normal parts. If there is oil leakage in the shaft extension or joints during operation, seals such as the skeleton oil seal should be replaced in time.